マザーボードの比較
ASUS社 Z97-DELUXE(NFC & WLC) と Z97-DELUXE の製品比較
□比較リストに追加する にチェックを入れる
□比較リストに追加する にチェックを入れる
最上部の比較リストをクリックし
比較する をクリックする
項目は多いがそのうち
しか差がない。
主な付属品 での違いは赤字がZ97-DELUXE(NFC & WLC)にのみあるもの。
■Z97-DELUXE(NFC & WLC)
User's manual
ASUS Q-Shield
6 x SATA 6Gb/s cable(s)
1 x NFC EXPRESS 2 box with 2 extra USB 3.0 ports + NFC EXPRESS tag + ASUS NFC EXPRESS utility
1 x ASUS 2T2R dual band Wi-Fi moving antennas (Wi-Fi 802.11a/b/g/n/ac compliant)
1 x external USB 3.0 cable for NFC EXPRESS 2 (120cm)
1 x Wireless Charger
1 x micro USB-to-USB cable for Wireless Charger (120cm)
1 x power adapter for Wireless Charger (5V DC, 2A, 10W)
1 x ThunderboltEX II/DUAL card *5
1 x ASUS TB header cable (linked from an ASUS motherboard's TB header to ThunderboltEX II/DUAL card's TB header)
1 x ASUS TB header convertor (9-pin to 5-pin)
1 x DisplayPort cable *6
1 x mini DisplayPort Cable *6
1 x SLI bridge(s)
1 x Q-connector(s) (2 in 1)
■Z97-DELUXE
User's manual
ASUS Q-Shield
6 x SATA 6Gb/s cable(s)
1 x ASUS 2T2R dual band Wi-Fi moving antennas (Wi-Fi 802.11a/b/g/n/ac compliant)
1 x SLI bridge(s)
その他での違いは赤字がZ97-DELUXE(NFC & WLC)にのみあるもの。
■Z97-DELUXE(NFC & WLC)
*1 : The PCIe x16_3, USB3_E56 and SATAExpress_E1 connectors share the same bandwidth. The PCIe x16_3's default setting is in Auto mode that automically optimizes the system bandwidth. If you use two of these connectors, the system automatically disables the unused connector.
*2 : M.2 Socket 3 shares bandwidth with SATAExpress_1
*3 : These functions will work depending on the CPU installed.
*4 : These SATA ports are for data hard drivers only. ATAPI devices are not supported.
*5 : Ensure to install your ThunderboltEX II/DUAL card in PCIeX16_3 slot, and configure the bandwidth to x4 mode in BIOS for better performance if needed.
*6 : Provides link from the motherboard's DisplayPort to the DisplayPort IN port on the ThunderboltEX II/DUAL card.
■Z97-DELUXE
*1 : The PCIe x16_3, USB3_E56 and SATAExpress_E1 connectors share the same bandwidth. The PCIe x16_3's default setting is in Auto mode that automically optimizes the system bandwidth. If you use two of these connectors, the system automatically disables the unused connector.
*2 : M.2 Socket 3 shares bandwidth with SATAExpress_1
*3 : These functions will work depending on the CPU installed.
*4 : These SATA ports are for data hard drivers only. ATAPI devices are not supported.
|
コメント（0）
